Base Con PCS (G)

High Performance water reducing and retarding polycarboxylate super plasticizer.

DESCRIPTION

Base Con PCS (G) is a super plasticizer for high performance concrete, high strength concrete high volume fly ash slag concrete and grouting, self leveling screed mortar, Base Con PCS (G) Complies with ASTM C 494, Type F specification

RECOMMENDED USES
  • Ultra high strength concrete (bridge flyover etc)
  • Precast Concrete
  • Ready mixed concrete where low water cement ratio is required.
  • High strength and high performance concrete.
  • Cast in situ concrete.
  • Priestesses reinforced concrete.
  • Pumped concrete, self leveling & self compacting concrete.
  • Grouting pile concrete etc.
  • In the works like railway, water conservancy, port municipal project express way etc.
ADVANTAGES
  • Produces Concrete with high levels of work ability without segregation.
  • Provides significantly higher strength & normal set time.
  • Provides improved finish ability & surface finishes.
  • Provides excellent concrete rheology & handing properties.
  • Has super air entrainment control has no chloride irons & non corrosion to steel bar.
PROPERTIES
Apparance pale brown liquid
Relative density : 1.08±0.05at 250C
PH : 6.9
Storage Condition : Free from Frost
DOSAGE

Optimum dosage of Base Con PCS (G) should be deter mined with trail mixes. As a guide, a dosage range of (0.40% to 1.2%) of cementatiticus material is recommended. The best amount should be subject to relevant experiment. When Base Con PCS (G) in applied the mixing time should be approximately extended in order to fully and evenly mix.

CAUTION

Do not mix with naphthalene based admixtures, If other admixtures are required simultaneous for same special projects compatibility tests should be conducted before hand.

SHELF LIFE

Use before one year, Keep container closed when not in use & do not store Base Con PCS (G) in direct sunlight

PACKING

Base Con PCS (G) is supplied in 250 kg of packages on request.

pdf